Boreas G130
Description:
BOREAS G130 is a concentrated coolant additive made with mono ethylene glycol and glycerol. It features a hybrid technology formulation that combines silicate-based inhibitors with proven Organic Acid Technology (OAT). Free from nitrites, amines, and phosphates, BOREAS G130 includes a high-performance anti-corrosion inhibitor system. It provides excellent protection for modern passenger cars and commercial vehicle engines against frost, corrosion, and overheating throughout the engine’s service life. BOREAS G130 meets the requirements of VW coolant specification VW TL 774-J (G13).
Benefits: 
FEATURES & BENEFITS:
- Contains renewable raw materials.
- Contains no amines, nitrites and phosphates.
- Suitable for aluminum as well as cast iron engines.
- Anti-cavitation, preventing foam and the retention of air, ensuring the good performance of the pump.
- Prevents the build-up of deposits, keeping the cooling system clean.
- Extended protection
Application:
BOREAS G130 must be diluted with water before filling into cooling system. We recommend distilled or demineralized water for this. Depending on water hardness and quality (hardness not greater than 3.6 mmol/l), dilution with tap water is also possible. BOREAS G300 should be blended with water in a concentration amongst 33% to 60% by volume prior to infilling. The usage of a 50/50 ratio for the mixture of water and BOREAS G130 is generally advisable.
Analysis values of the water may not exceed the following threshold values:
Water hardness: 0 – 3.6 mmol/l
Chloride content: max. 100 ppm
Sulfate content: max. 100 ppm